cbb/DCU_APP
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
f63114f5fde9f8068a5710dff3d58974644f4300
DCU_APP/GD32E508_DCU_APP/RTE/Device/GD32E508VE/system_gd32e50x.c
T
cbb f63114f5fd feat(canfd): 切换 CANFD 接收为中断驱动和环形缓冲机制 
- 将 CANFD 接收机制由轮询改为 FIFO0 的中断事件驱动处理
- 实现循环取空硬件 FIFO0，提高接收效率和响应速度
- 引入环形缓冲区缓存接收帧，支持多路通道多帧队列管理
- 置位解析任务标志位，实现接收数据的异步解析
- 增加接收中断统计，包括 FIFO 满和溢出计数
- 重构临界区代码，使用自定义函数保护中断状态
- 修改接收过滤器配置，支持按掩码匹配标准帧进入 FIFO0
- 使能 CAN FIFO0 多种中断标志，包括非空、满和溢出中断
2026-05-30 00:24:31 +08:00

1196 lines
38 KiB
C
Raw Blame History

/*!
\file system_gd32e50x.c
\brief CMSIS Cortex-M33 Device Peripheral Access Layer Source File for
GD32E50x Device Series
*/
/*
* Copyright (c) 2009-2018 Arm Limited. All rights reserved.
* Copyright (c) 2023, GigaDevice Semiconductor Inc.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
/* This file refers the CMSIS standard, some adjustments are made according to GigaDevice chips */
#include "gd32e50x.h"
/* system frequency define */
#define __IRC8M (IRC8M_VALUE) /* internal 8 MHz RC oscillator frequency */
#define __HXTAL (HXTAL_VALUE) /* high speed crystal oscillator frequency */
#define VECT_TAB_OFFSET (uint32_t)0x00048000 /* vector table base offset */
/* select a system clock by uncommenting the following line */
/* use IRC8M */
//#define __SYSTEM_CLOCK_IRC8M (uint32_t)(__IRC8M)
//#define __SYSTEM_CLOCK_72M_PLL_IRC8M (uint32_t)(72000000)
//#define __SYSTEM_CLOCK_120M_PLL_IRC8M (uint32_t)(120000000)
//#define __SYSTEM_CLOCK_168M_PLL_IRC8M (uint32_t)(168000000)
//#define __SYSTEM_CLOCK_180M_PLL_IRC8M (uint32_t)(180000000)
/* use HXTAL(EPRT/HD series CK_HXTAL = 8M, CL series CK_HXTAL = 25M) */
//#define __SYSTEM_CLOCK_HXTAL (uint32_t)(__HXTAL)
//#define __SYSTEM_CLOCK_72M_PLL_HXTAL (uint32_t)(72000000)
//#define __SYSTEM_CLOCK_120M_PLL_HXTAL (uint32_t)(120000000)
//#define __SYSTEM_CLOCK_168M_PLL_HXTAL (uint32_t)(168000000)
#define __SYSTEM_CLOCK_180M_PLL_HXTAL (uint32_t)(180000000)
/* The following is to prevent Vcore fluctuations caused by frequency switching.
It is strongly recommended to include it to avoid issues caused by self-removal. */
#define RCU_MODIFY(__delay) do{ \
volatile uint32_t i,reg;; \
if(0 != __delay){ \
/* Insert a software delay */ \
for(i=0; i<__delay; i++){ \
} \
reg = RCU_CFG0; \
reg &= ~(RCU_CFG0_AHBPSC); \
reg |= RCU_AHB_CKSYS_DIV2; \
/* AHB = SYSCLK/2 */ \
RCU_CFG0 = reg; \
/* Insert a software delay */ \
for(i=0; i<__delay; i++){ \
} \
reg = RCU_CFG0; \
reg &= ~(RCU_CFG0_AHBPSC); \
reg |= RCU_AHB_CKSYS_DIV4; \
/* AHB = SYSCLK/4 */ \
RCU_CFG0 = reg; \
/* Insert a software delay */ \
for(i=0; i<__delay; i++){ \
} \
} \
}while(0)
/* The following is to prevent Vcore fluctuations caused by frequency switching.
It is strongly recommended to include it to avoid issues caused by self-removal. */
#define RCU_MODIFY_UP(__delay) do{ \
volatile uint32_t i,reg; \
if(0 != __delay){ \
for(i=0; i<__delay; i++){ \
} \
reg = RCU_CFG0; \
reg &= ~(RCU_CFG0_AHBPSC); \
reg |= RCU_AHB_CKSYS_DIV2; \
RCU_CFG0 = reg; \
for(i=0; i<__delay; i++){ \
} \
reg = RCU_CFG0; \
reg &= ~(RCU_CFG0_AHBPSC); \
reg |= RCU_AHB_CKSYS_DIV1; \
RCU_CFG0 = reg; \
} \
}while(0)
#define HXTALSTB_DELAY { \
volatile uint32_t i; \
for(i=0; i<0x1000; i++){ \
} \
}
#define SEL_IRC8M 0x00
#define SEL_HXTAL 0x01
#define SEL_PLL 0x02
/* set the system clock frequency and declare the system clock configuration function */
#ifdef __SYSTEM_CLOCK_IRC8M
uint32_t SystemCoreClock = __SYSTEM_CLOCK_IRC8M;
static void system_clock_8m_irc8m(void);
#elif defined (__SYSTEM_CLOCK_72M_PLL_IRC8M)
uint32_t SystemCoreClock = __SYSTEM_CLOCK_72M_PLL_IRC8M;
static void system_clock_72m_irc8m(void);
#elif defined (__SYSTEM_CLOCK_120M_PLL_IRC8M)
uint32_t SystemCoreClock = __SYSTEM_CLOCK_120M_PLL_IRC8M;
static void system_clock_120m_irc8m(void);
#elif defined (__SYSTEM_CLOCK_168M_PLL_IRC8M)
uint32_t SystemCoreClock = __SYSTEM_CLOCK_168M_PLL_IRC8M;
static void system_clock_168m_irc8m(void);
#elif defined (__SYSTEM_CLOCK_180M_PLL_IRC8M)
uint32_t SystemCoreClock = __SYSTEM_CLOCK_180M_PLL_IRC8M;
static void system_clock_180m_irc8m(void);
#elif defined (__SYSTEM_CLOCK_HXTAL)
uint32_t SystemCoreClock = __SYSTEM_CLOCK_HXTAL;
static void system_clock_hxtal(void);
#elif defined (__SYSTEM_CLOCK_72M_PLL_HXTAL)
uint32_t SystemCoreClock = __SYSTEM_CLOCK_72M_PLL_HXTAL;
static void system_clock_72m_hxtal(void);
#elif defined (__SYSTEM_CLOCK_120M_PLL_HXTAL)
uint32_t SystemCoreClock = __SYSTEM_CLOCK_120M_PLL_HXTAL;
static void system_clock_120m_hxtal(void);
#elif defined (__SYSTEM_CLOCK_168M_PLL_HXTAL)
uint32_t SystemCoreClock = __SYSTEM_CLOCK_168M_PLL_HXTAL;
static void system_clock_168m_hxtal(void);
#elif defined (__SYSTEM_CLOCK_180M_PLL_HXTAL)
uint32_t SystemCoreClock = __SYSTEM_CLOCK_180M_PLL_HXTAL;
static void system_clock_180m_hxtal(void);
#endif /* __SYSTEM_CLOCK_IRC8M */
/* configure the system clock */
static void system_clock_config(void);
/*!
\brief software delay to prevent the impact of Vcore fluctuations
\param[in] time delay factor
\param[out] none
\retval none
*/
static void _soft_delay_(uint32_t time)
{
__IO uint32_t i;
for(i=0; i<time*10; i++){
}
}
/*!
\brief setup the micro-controller system, initialize the system
\param[in] none
\param[out] none
\retval none
*/
void SystemInit (void)
{
/* FPU settings */
#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
SCB->CPACR |= ((3UL << 10*2)|(3UL << 11*2)); /* set CP10 and CP11 Full Access */
#endif
/* reset the RCU clock configuration to the default reset state */
/* Set IRC8MEN bit */
RCU_CTL |= RCU_CTL_IRC8MEN;
while(0U == (RCU_CTL & RCU_CTL_IRC8MSTB)){
}
if(((RCU_CFG0 & RCU_CFG0_SCSS) == RCU_SCSS_PLL)){
RCU_MODIFY(0x100);
}
RCU_CFG0 &= ~RCU_CFG0_SCS;
_soft_delay_(100);
#if (defined(GD32EPRT) || defined(GD32E50X_HD))
/* reset HXTALEN, CKMEN and PLLEN bits */
RCU_CTL &= ~(RCU_CTL_PLLEN | RCU_CTL_CKMEN | RCU_CTL_HXTALEN);
/* disable all interrupts */
RCU_INT = 0x009f0000U;
#elif (defined(GD32E50X_CL) || defined(GD32E508))
/* Reset HXTALEN, CKMEN, PLLEN, PLL1EN and PLL2EN bits */
RCU_CTL &= ~(RCU_CTL_PLLEN |RCU_CTL_PLL1EN | RCU_CTL_PLL2EN | RCU_CTL_CKMEN | RCU_CTL_HXTALEN);
/* disable all interrupts */
RCU_INT = 0x00ff0000U;
#endif /* GD32E50X_EPRT and GD32E50X_HD */
/* Reset CFG0 and CFG1 registers */
RCU_CFG0 = 0x00000000U;
RCU_CFG1 = 0x00000000U;
/* reset HXTALBPS bit */
RCU_CTL &= ~(RCU_CTL_HXTALBPS);
/* configure the system clock source, PLL Multiplier, AHB/APBx prescalers and Flash settings */
system_clock_config();
#ifdef VECT_TAB_SRAM
nvic_vector_table_set(NVIC_VECTTAB_RAM,VECT_TAB_OFFSET);
#else
nvic_vector_table_set(NVIC_VECTTAB_FLASH,VECT_TAB_OFFSET);
#endif
}
/*!
\brief configure the system clock
\param[in] none
\param[out] none
\retval none
*/
static void system_clock_config(void)
{
#ifdef __SYSTEM_CLOCK_IRC8M
system_clock_8m_irc8m();
#elif defined (__SYSTEM_CLOCK_72M_PLL_IRC8M)
system_clock_72m_irc8m();
#elif defined (__SYSTEM_CLOCK_120M_PLL_IRC8M)
system_clock_120m_irc8m();
#elif defined (__SYSTEM_CLOCK_168M_PLL_IRC8M)
system_clock_168m_irc8m();
#elif defined (__SYSTEM_CLOCK_180M_PLL_IRC8M)
system_clock_180m_irc8m();
#elif defined (__SYSTEM_CLOCK_HXTAL)
system_clock_hxtal();
#elif defined (__SYSTEM_CLOCK_72M_PLL_HXTAL)
system_clock_72m_hxtal();
#elif defined (__SYSTEM_CLOCK_120M_PLL_HXTAL)
system_clock_120m_hxtal();
#elif defined (__SYSTEM_CLOCK_168M_PLL_HXTAL)
system_clock_168m_hxtal();
#elif defined (__SYSTEM_CLOCK_180M_PLL_HXTAL)
system_clock_180m_hxtal();
#endif /* __SYSTEM_CLOCK_IRC8M */
}
#ifdef __SYSTEM_CLOCK_IRC8M
/*!
\brief configure the system clock to 8M by IRC8M
\param[in] none
\param[out] none
\retval none
*/
static void system_clock_8m_irc8m(void)
{
uint32_t timeout = 0U;
uint32_t stab_flag = 0U;
__IO uint32_t reg_temp;
/* enable IRC8M */
RCU_CTL |= RCU_CTL_IRC8MEN;
/* wait until IRC8M is stable or the startup time is longer than IRC8M_STARTUP_TIMEOUT */
do{
timeout++;
stab_flag = (RCU_CTL & RCU_CTL_IRC8MSTB);
}
while((0U == stab_flag) && (IRC8M_STARTUP_TIMEOUT != timeout));
/* if fail */
if(0U == (RCU_CTL & RCU_CTL_IRC8MSTB)){
while(1){
}
}
/* AHB = SYSCLK */
RCU_CFG0 |= RCU_AHB_CKSYS_DIV1;
/* APB2 = AHB/1 */
RCU_CFG0 |= RCU_APB2_CKAHB_DIV1;
/* APB1 = AHB/2 */
RCU_CFG0 |= RCU_APB1_CKAHB_DIV2;
reg_temp = RCU_CFG0;
/* select IRC8M as system clock */
reg_temp &= ~RCU_CFG0_SCS;
reg_temp |= RCU_CKSYSSRC_IRC8M;
RCU_CFG0 = reg_temp;
/* wait until IRC8M is selected as system clock */
while(RCU_SCSS_IRC8M != (RCU_CFG0 & RCU_CFG0_SCSS)){
}
}
#elif defined (__SYSTEM_CLOCK_72M_PLL_IRC8M)
/*!
\brief configure the system clock to 72M by PLL which selects IRC8M as its clock source
\param[in] none
\param[out] none
\retval none
*/
static void system_clock_72m_irc8m(void)
{
uint32_t timeout = 0U;
uint32_t stab_flag = 0U;
__IO uint32_t reg_temp;
/* enable IRC8M */
RCU_CTL |= RCU_CTL_IRC8MEN;
/* wait until IRC8M is stable or the startup time is longer than IRC8M_STARTUP_TIMEOUT */
do{
timeout++;
stab_flag = (RCU_CTL & RCU_CTL_IRC8MSTB);
}
while((0U == stab_flag) && (IRC8M_STARTUP_TIMEOUT != timeout));
/* if fail */
if(0U == (RCU_CTL & RCU_CTL_IRC8MSTB)){
while(1){
}
}
FMC_WS = (FMC_WS & (~FMC_WS_WSCNT)) | WS_WSCNT(1);
/* LDO output voltage high mode */
RCU_APB1EN |= RCU_APB1EN_PMUEN;
/* IRC8M is stable */
/* AHB = SYSCLK/4 */
RCU_CFG0 |= RCU_AHB_CKSYS_DIV4;
/* APB2 = AHB/1 */
RCU_CFG0 |= RCU_APB2_CKAHB_DIV1;
/* APB1 = AHB/2 */
RCU_CFG0 |= RCU_APB1_CKAHB_DIV2;
/* CK_PLL = (CK_IRC8M/2) * 18 = 72 MHz */
RCU_CFG0 &= ~(RCU_CFG0_PLLMF | RCU_CFG0_PLLMF_4 | RCU_CFG0_PLLMF_5);
RCU_CFG0 |= RCU_PLL_MUL18;
/* enable PLL */
RCU_CTL |= RCU_CTL_PLLEN;
/* wait until PLL is stable */
while(0U == (RCU_CTL & RCU_CTL_PLLSTB)){
}
/* enable the high-drive to extend the clock frequency to 120 MHz */
PMU_CTL0 |= PMU_CTL0_HDEN;
while(0U == (PMU_CS0 & PMU_CS0_HDRF)){
}
/* select the high-drive mode */
PMU_CTL0 |= PMU_CTL0_HDS;
while(0U == (PMU_CS0 & PMU_CS0_HDSRF)){
}
reg_temp = RCU_CFG0;
/* select PLL as system clock */
reg_temp &= ~RCU_CFG0_SCS;
reg_temp |= RCU_CKSYSSRC_PLL;
RCU_CFG0 = reg_temp;
/* wait until PLL is selected as system clock */
while(RCU_SCSS_PLL != (RCU_CFG0 & RCU_CFG0_SCSS)){
}
RCU_MODIFY_UP(0x50);
}
#elif defined (__SYSTEM_CLOCK_120M_PLL_IRC8M)
/*!
\brief configure the system clock to 120M by PLL which selects IRC8M as its clock source
\param[in] none
\param[out] none
\retval none
*/
static void system_clock_120m_irc8m(void)
{
uint32_t timeout = 0U;
uint32_t stab_flag = 0U;
__IO uint32_t reg_temp;
/* enable IRC8M */
RCU_CTL |= RCU_CTL_IRC8MEN;
/* wait until IRC8M is stable or the startup time is longer than IRC8M_STARTUP_TIMEOUT */
do{
timeout++;
stab_flag = (RCU_CTL & RCU_CTL_IRC8MSTB);
}while((0U == stab_flag) && (IRC8M_STARTUP_TIMEOUT != timeout));
/* if fail */
if(0U == (RCU_CTL & RCU_CTL_IRC8MSTB)){
while(1){
}
}
FMC_WS = (FMC_WS & (~FMC_WS_WSCNT)) | WS_WSCNT(3);
/* LDO output voltage high mode */
RCU_APB1EN |= RCU_APB1EN_PMUEN;
/* IRC8M is stable */
/* AHB = SYSCLK/4 */
RCU_CFG0 |= RCU_AHB_CKSYS_DIV4;
/* APB2 = AHB/1 */
RCU_CFG0 |= RCU_APB2_CKAHB_DIV1;
/* APB1 = AHB/2 */
RCU_CFG0 |= RCU_APB1_CKAHB_DIV2;
/* CK_PLL = (CK_IRC8M/2) * 30 = 120 MHz */
RCU_CFG0 &= ~(RCU_CFG0_PLLMF | RCU_CFG0_PLLMF_4 | RCU_CFG0_PLLMF_5);
RCU_CFG0 |= RCU_PLL_MUL30;
/* enable PLL */
RCU_CTL |= RCU_CTL_PLLEN;
/* wait until PLL is stable */
while(0U == (RCU_CTL & RCU_CTL_PLLSTB)){
}
/* enable the high-drive to extend the clock frequency to 120 MHz */
PMU_CTL0 |= PMU_CTL0_HDEN;
while(0U == (PMU_CS0 & PMU_CS0_HDRF)){
}
/* select the high-drive mode */
PMU_CTL0 |= PMU_CTL0_HDS;
while(0U == (PMU_CS0 & PMU_CS0_HDSRF)){
}
reg_temp = RCU_CFG0;
/* select PLL as system clock */
reg_temp &= ~RCU_CFG0_SCS;
reg_temp |= RCU_CKSYSSRC_PLL;
RCU_CFG0 = reg_temp;
/* wait until PLL is selected as system clock */
while(RCU_SCSS_PLL != (RCU_CFG0 & RCU_CFG0_SCSS)){
}
RCU_MODIFY_UP(0x50);
}
#elif defined (__SYSTEM_CLOCK_168M_PLL_IRC8M)
/*!
\brief configure the system clock to 168M by PLL which selects IRC8M as its clock source
\param[in] none
\param[out] none
\retval none
*/
static void system_clock_168m_irc8m(void)
{
uint32_t timeout = 0U;
uint32_t stab_flag = 0U;
__IO uint32_t reg_temp;
/* enable IRC8M */
RCU_CTL |= RCU_CTL_IRC8MEN;
/* wait until IRC8M is stable or the startup time is longer than IRC8M_STARTUP_TIMEOUT */
do{
timeout++;
stab_flag = (RCU_CTL & RCU_CTL_IRC8MSTB);
}while((0U == stab_flag) && (IRC8M_STARTUP_TIMEOUT != timeout));
/* if fail */
if(0U == (RCU_CTL & RCU_CTL_IRC8MSTB)){
while(1){
}
}
FMC_WS = (FMC_WS & (~FMC_WS_WSCNT)) | WS_WSCNT(4);
/* LDO output voltage high mode */
RCU_APB1EN |= RCU_APB1EN_PMUEN;
/* IRC8M is stable */
/* AHB = SYSCLK/4 */
RCU_CFG0 |= RCU_AHB_CKSYS_DIV4;
/* APB2 = AHB/1 */
RCU_CFG0 |= RCU_APB2_CKAHB_DIV1;
/* APB1 = AHB/2 */
RCU_CFG0 |= RCU_APB1_CKAHB_DIV2;
/* CK_PLL = (CK_IRC8M/2) * 42 = 168 MHz */
RCU_CFG0 &= ~(RCU_CFG0_PLLMF | RCU_CFG0_PLLMF_4 | RCU_CFG0_PLLMF_5);
RCU_CFG0 |= RCU_PLL_MUL42;
/* enable PLL */
RCU_CTL |= RCU_CTL_PLLEN;
/* wait until PLL is stable */
while(0U == (RCU_CTL & RCU_CTL_PLLSTB)){
}
/* enable the high-drive to extend the clock frequency to 120 MHz */
PMU_CTL0 |= PMU_CTL0_HDEN;
while(0U == (PMU_CS0 & PMU_CS0_HDRF)){
}
/* select the high-drive mode */
PMU_CTL0 |= PMU_CTL0_HDS;
while(0U == (PMU_CS0 & PMU_CS0_HDSRF)){
}
reg_temp = RCU_CFG0;
/* select PLL as system clock */
reg_temp &= ~RCU_CFG0_SCS;
reg_temp |= RCU_CKSYSSRC_PLL;
RCU_CFG0 = reg_temp;
/* wait until PLL is selected as system clock */
while(RCU_SCSS_PLL != (RCU_CFG0 & RCU_CFG0_SCSS)){
}
RCU_MODIFY_UP(0x50);
}
#elif defined (__SYSTEM_CLOCK_180M_PLL_IRC8M)
/*!
\brief configure the system clock to 180M by PLL which selects IRC8M as its clock source
\param[in] none
\param[out] none
\retval none
*/
static void system_clock_180m_irc8m(void)
{
uint32_t timeout = 0U;
uint32_t stab_flag = 0U;
__IO uint32_t reg_temp;
/* enable IRC8M */
RCU_CTL |= RCU_CTL_IRC8MEN;
/* wait until IRC8M is stable or the startup time is longer than IRC8M_STARTUP_TIMEOUT */
do{
timeout++;
stab_flag = (RCU_CTL & RCU_CTL_IRC8MSTB);
}while((0U == stab_flag) && (IRC8M_STARTUP_TIMEOUT != timeout));
/* if fail */
if(0U == (RCU_CTL & RCU_CTL_IRC8MSTB)){
while(1){
}
}
FMC_WS = (FMC_WS & (~FMC_WS_WSCNT)) | WS_WSCNT(4);
/* LDO output voltage high mode */
RCU_APB1EN |= RCU_APB1EN_PMUEN;
/* IRC8M is stable */
/* AHB = SYSCLK/4 */
RCU_CFG0 |= RCU_AHB_CKSYS_DIV4;
/* APB2 = AHB/1 */
RCU_CFG0 |= RCU_APB2_CKAHB_DIV1;
/* APB1 = AHB/2 */
RCU_CFG0 |= RCU_APB1_CKAHB_DIV2;
/* CK_PLL = (CK_IRC8M/2) * 45 = 180 MHz */
RCU_CFG0 &= ~(RCU_CFG0_PLLMF | RCU_CFG0_PLLMF_4 | RCU_CFG0_PLLMF_5);
RCU_CFG0 |= RCU_PLL_MUL45;
/* enable PLL */
RCU_CTL |= RCU_CTL_PLLEN;
/* wait until PLL is stable */
while(0U == (RCU_CTL & RCU_CTL_PLLSTB)){
}
/* enable the high-drive to extend the clock frequency to 120 MHz */
PMU_CTL0 |= PMU_CTL0_HDEN;
while(0U == (PMU_CS0 & PMU_CS0_HDRF)){
}
/* select the high-drive mode */
PMU_CTL0 |= PMU_CTL0_HDS;
while(0U == (PMU_CS0 & PMU_CS0_HDSRF)){
}
reg_temp = RCU_CFG0;
/* select PLL as system clock */
reg_temp &= ~RCU_CFG0_SCS;
reg_temp |= RCU_CKSYSSRC_PLL;
RCU_CFG0 = reg_temp;
/* wait until PLL is selected as system clock */
while(RCU_SCSS_PLL != (RCU_CFG0 & RCU_CFG0_SCSS)){
}
RCU_MODIFY_UP(0x50);
}
#elif defined (__SYSTEM_CLOCK_HXTAL)
/*!
\brief configure the system clock to HXTAL
\param[in] none
\param[out] none
\retval none
*/
static void system_clock_hxtal(void)
{
uint32_t timeout = 0U;
uint32_t stab_flag = 0U;
__IO uint32_t reg_temp;
/* enable HXTAL */
RCU_CTL |= RCU_CTL_HXTALEN;
HXTALSTB_DELAY
/* wait until HXTAL is stable or the startup time is longer than HXTAL_STARTUP_TIMEOUT */
do{
timeout++;
stab_flag = (RCU_CTL & RCU_CTL_HXTALSTB);
}while((0U == stab_flag) && (HXTAL_STARTUP_TIMEOUT != timeout));
/* if fail */
if(0U == (RCU_CTL & RCU_CTL_HXTALSTB)){
while(1){
}
}
/* AHB = SYSCLK */
RCU_CFG0 |= RCU_AHB_CKSYS_DIV1;
/* APB2 = AHB/1 */
RCU_CFG0 |= RCU_APB2_CKAHB_DIV1;
/* APB1 = AHB/2 */
RCU_CFG0 |= RCU_APB1_CKAHB_DIV2;
reg_temp = RCU_CFG0;
/* select HXTAL as system clock */
reg_temp &= ~RCU_CFG0_SCS;
reg_temp |= RCU_CKSYSSRC_HXTAL;
RCU_CFG0 = reg_temp;
/* wait until HXTAL is selected as system clock */
while(RCU_SCSS_HXTAL != (RCU_CFG0 & RCU_CFG0_SCSS)){
}
}
#elif defined (__SYSTEM_CLOCK_72M_PLL_HXTAL)
/*!
\brief configure the system clock to 72M by PLL which selects HXTAL as its clock source
\param[in] none
\param[out] none
\retval none
*/
static void system_clock_72m_hxtal(void)
{
uint32_t timeout = 0U;
uint32_t stab_flag = 0U;
__IO uint32_t reg_temp;
/* enable HXTAL */
RCU_CTL |= RCU_CTL_HXTALEN;
HXTALSTB_DELAY
/* wait until HXTAL is stable or the startup time is longer than HXTAL_STARTUP_TIMEOUT */
do{
timeout++;
stab_flag = (RCU_CTL & RCU_CTL_HXTALSTB);
}while((0U == stab_flag) && (HXTAL_STARTUP_TIMEOUT != timeout));
/* if fail */
if(0U == (RCU_CTL & RCU_CTL_HXTALSTB)){
while(1){
}
}
FMC_WS = (FMC_WS & (~FMC_WS_WSCNT)) | WS_WSCNT(1);
RCU_APB1EN |= RCU_APB1EN_PMUEN;
/* HXTAL is stable */
/* AHB = SYSCLK/4 */
RCU_CFG0 |= RCU_AHB_CKSYS_DIV4;
/* APB2 = AHB/1 */
RCU_CFG0 |= RCU_APB2_CKAHB_DIV1;
/* APB1 = AHB/2 */
RCU_CFG0 |= RCU_APB1_CKAHB_DIV2;
#if defined(GD32E50X_HD)
/* select HXTAL/2 as clock source */
RCU_CFG0 &= ~(RCU_CFG0_PLLSEL | RCU_CFG0_PREDV0);
RCU_CFG0 |= (RCU_PLLSRC_HXTAL_IRC48M | RCU_CFG0_PREDV0);
/* CK_PLL = (CK_HXTAL/2) * 18 = 72 MHz */
RCU_CFG0 &= ~(RCU_CFG0_PLLMF | RCU_CFG0_PLLMF_4 | RCU_CFG0_PLLMF_5);
RCU_CFG0 |= RCU_PLL_MUL18;
#elif (defined(GD32E50X_CL) || defined(GD32E508))
/* CK_PLL = (CK_PREDIV0) * 18 = 72 MHz */
RCU_CFG0 &= ~(RCU_CFG0_PLLMF | RCU_CFG0_PLLMF_4 | RCU_CFG0_PLLMF_5);
RCU_CFG0 |= (RCU_PLLSRC_HXTAL_IRC48M | RCU_PLL_MUL18);
/* CK_PREDIV0 = (CK_HXTAL)/5 *8 /10 = 4 MHz */
RCU_CFG1 &= ~(RCU_CFG1_PLLPRESEL | RCU_CFG1_PREDV0SEL | RCU_CFG1_PLL1MF | RCU_CFG1_PREDV1 | RCU_CFG1_PREDV0);
RCU_CFG1 |= (RCU_PLLPRESRC_HXTAL | RCU_PREDV0SRC_CKPLL1 | RCU_PLL1_MUL8 | RCU_PREDV1_DIV5 | RCU_PREDV0_DIV10);
/* enable PLL1 */
RCU_CTL |= RCU_CTL_PLL1EN;
/* wait till PLL1 is ready */
while((RCU_CTL & RCU_CTL_PLL1STB) == 0U){
}
#elif defined(GD32EPRT)
/* CK_PLL = (CK_PREDIV0) * 18 = 72 MHz */
RCU_CFG0 &= ~(RCU_CFG0_PLLMF | RCU_CFG0_PLLMF_4 | RCU_CFG0_PLLMF_5);
RCU_CFG0 |= (RCU_PLLSRC_HXTAL_IRC48M | RCU_PLL_MUL18);
/* CK_PREDIV0 = (CK_HXTAL)/2 *8 /8 = 4 MHz */
RCU_CFG1 &= ~(RCU_CFG1_PLLPRESEL | RCU_CFG1_PREDV0SEL | RCU_CFG1_PLL1MF | RCU_CFG1_PREDV1 | RCU_CFG1_PREDV0);
RCU_CFG1 |= (RCU_PLLPRESRC_HXTAL | RCU_PREDV0SRC_CKPLL1 | RCU_PLL1_MUL8 | RCU_PREDV1_DIV2 | RCU_PREDV0_DIV8);
/* enable PLL1 */
RCU_CTL |= RCU_CTL_PLL1EN;
/* wait till PLL1 is ready */
while((RCU_CTL & RCU_CTL_PLL1STB) == 0U){
}
#endif /* GD32E50X_HD */
/* enable PLL */
RCU_CTL |= RCU_CTL_PLLEN;
/* wait until PLL is stable */
while(0U == (RCU_CTL & RCU_CTL_PLLSTB)){
}
/* enable the high-drive to extend the clock frequency to 180 MHz */
PMU_CTL0 |= PMU_CTL0_HDEN;
while(0U == (PMU_CS0 & PMU_CS0_HDRF)){
}
/* select the high-drive mode */
PMU_CTL0 |= PMU_CTL0_HDS;
while(0U == (PMU_CS0 & PMU_CS0_HDSRF)){
}
reg_temp = RCU_CFG0;
/* select PLL as system clock */
reg_temp &= ~RCU_CFG0_SCS;
reg_temp |= RCU_CKSYSSRC_PLL;
RCU_CFG0 = reg_temp;
/* wait until PLL is selected as system clock */
while(RCU_SCSS_PLL != (RCU_CFG0 & RCU_CFG0_SCSS)){
}
RCU_MODIFY_UP(0x50);
}
#elif defined (__SYSTEM_CLOCK_120M_PLL_HXTAL)
/*!
\brief configure the system clock to 72M by PLL which selects HXTAL as its clock source
\param[in] none
\param[out] none
\retval none
*/
static void system_clock_120m_hxtal(void)
{
uint32_t timeout = 0U;
uint32_t stab_flag = 0U;
__IO uint32_t reg_temp;
/* enable HXTAL */
RCU_CTL |= RCU_CTL_HXTALEN;
HXTALSTB_DELAY
/* wait until HXTAL is stable or the startup time is longer than HXTAL_STARTUP_TIMEOUT */
do{
timeout++;
stab_flag = (RCU_CTL & RCU_CTL_HXTALSTB);
}while((0U == stab_flag) && (HXTAL_STARTUP_TIMEOUT != timeout));
/* if fail */
if(0U == (RCU_CTL & RCU_CTL_HXTALSTB)){
while(1){
}
}
FMC_WS = (FMC_WS & (~FMC_WS_WSCNT)) | WS_WSCNT(3);
RCU_APB1EN |= RCU_APB1EN_PMUEN;
/* HXTAL is stable */
/* AHB = SYSCLK/4 */
RCU_CFG0 |= RCU_AHB_CKSYS_DIV4;
/* APB2 = AHB/1 */
RCU_CFG0 |= RCU_APB2_CKAHB_DIV1;
/* APB1 = AHB/2 */
RCU_CFG0 |= RCU_APB1_CKAHB_DIV2;
#if defined(GD32E50X_HD)
/* select HXTAL/2 as clock source */
RCU_CFG0 &= ~(RCU_CFG0_PLLSEL | RCU_CFG0_PREDV0);
RCU_CFG0 |= (RCU_PLLSRC_HXTAL_IRC48M | RCU_CFG0_PREDV0);
/* CK_PLL = (CK_HXTAL/2) * 30 = 120 MHz */
RCU_CFG0 &= ~(RCU_CFG0_PLLMF | RCU_CFG0_PLLMF_4 | RCU_CFG0_PLLMF_5);
RCU_CFG0 |= RCU_PLL_MUL30;
#elif (defined(GD32E50X_CL) || defined(GD32E508))
/* CK_PLL = (CK_PREDIV0) * 30 = 120 MHz */
RCU_CFG0 &= ~(RCU_CFG0_PLLMF | RCU_CFG0_PLLMF_4 | RCU_CFG0_PLLMF_5);
RCU_CFG0 |= (RCU_PLLSRC_HXTAL_IRC48M | RCU_PLL_MUL30);
/* CK_PREDIV0 = (CK_HXTAL)/5 *8 /10 = 4 MHz */
RCU_CFG1 &= ~(RCU_CFG1_PLLPRESEL | RCU_CFG1_PREDV0SEL | RCU_CFG1_PLL1MF | RCU_CFG1_PREDV1 | RCU_CFG1_PREDV0);
RCU_CFG1 |= (RCU_PLLPRESRC_HXTAL | RCU_PREDV0SRC_CKPLL1 | RCU_PLL1_MUL8 | RCU_PREDV1_DIV5 | RCU_PREDV0_DIV10);
/* enable PLL1 */
RCU_CTL |= RCU_CTL_PLL1EN;
/* wait till PLL1 is ready */
while((RCU_CTL & RCU_CTL_PLL1STB) == 0U){
}
#elif defined(GD32EPRT)
/* CK_PLL = (CK_PREDIV0) * 30 = 120 MHz */
RCU_CFG0 &= ~(RCU_CFG0_PLLMF | RCU_CFG0_PLLMF_4 | RCU_CFG0_PLLMF_5);
RCU_CFG0 |= (RCU_PLLSRC_HXTAL_IRC48M | RCU_PLL_MUL30);
/* CK_PREDIV0 = (CK_HXTAL)/2 *8 /8 = 4 MHz */
RCU_CFG1 &= ~(RCU_CFG1_PLLPRESEL | RCU_CFG1_PREDV0SEL | RCU_CFG1_PLL1MF | RCU_CFG1_PREDV1 | RCU_CFG1_PREDV0);
RCU_CFG1 |= (RCU_PLLPRESRC_HXTAL | RCU_PREDV0SRC_CKPLL1 | RCU_PLL1_MUL8 | RCU_PREDV1_DIV2 | RCU_PREDV0_DIV8);
/* enable PLL1 */
RCU_CTL |= RCU_CTL_PLL1EN;
/* wait till PLL1 is ready */
while((RCU_CTL & RCU_CTL_PLL1STB) == 0U){
}
#endif /* GD32F50X_HD */
/* enable PLL */
RCU_CTL |= RCU_CTL_PLLEN;
/* wait until PLL is stable */
while(0U == (RCU_CTL & RCU_CTL_PLLSTB)){
}
/* enable the high-drive to extend the clock frequency to 180 MHz */
PMU_CTL0 |= PMU_CTL0_HDEN;
while(0U == (PMU_CS0 & PMU_CS0_HDRF)){
}
/* select the high-drive mode */
PMU_CTL0 |= PMU_CTL0_HDS;
while(0U == (PMU_CS0 & PMU_CS0_HDSRF)){
}
reg_temp = RCU_CFG0;
/* select PLL as system clock */
reg_temp &= ~RCU_CFG0_SCS;
reg_temp |= RCU_CKSYSSRC_PLL;
RCU_CFG0 = reg_temp;
/* wait until PLL is selected as system clock */
while(RCU_SCSS_PLL != (RCU_CFG0 & RCU_CFG0_SCSS)){
}
RCU_MODIFY_UP(0x50);
}
#elif defined (__SYSTEM_CLOCK_168M_PLL_HXTAL)
/*!
\brief configure the system clock to 108M by PLL which selects HXTAL as its clock source
\param[in] none
\param[out] none
\retval none
*/
static void system_clock_168m_hxtal(void)
{
uint32_t timeout = 0U;
uint32_t stab_flag = 0U;
__IO uint32_t reg_temp;
/* enable HXTAL */
RCU_CTL |= RCU_CTL_HXTALEN;
HXTALSTB_DELAY
/* wait until HXTAL is stable or the startup time is longer than HXTAL_STARTUP_TIMEOUT */
do{
timeout++;
stab_flag = (RCU_CTL & RCU_CTL_HXTALSTB);
}while((0U == stab_flag) && (HXTAL_STARTUP_TIMEOUT != timeout));
/* if fail */
if(0U == (RCU_CTL & RCU_CTL_HXTALSTB)){
while(1){
}
}
FMC_WS = (FMC_WS & (~FMC_WS_WSCNT)) | WS_WSCNT(4);
RCU_APB1EN |= RCU_APB1EN_PMUEN;
/* HXTAL is stable */
/* AHB = SYSCLK/4 */
RCU_CFG0 |= RCU_AHB_CKSYS_DIV4;
/* APB2 = AHB/1 */
RCU_CFG0 |= RCU_APB2_CKAHB_DIV1;
/* APB1 = AHB/2 */
RCU_CFG0 |= RCU_APB1_CKAHB_DIV2;
#if defined(GD32E50X_HD)
/* select HXTAL/2 as clock source */
RCU_CFG0 &= ~(RCU_CFG0_PLLSEL | RCU_CFG0_PREDV0);
RCU_CFG0 |= (RCU_PLLSRC_HXTAL_IRC48M | RCU_CFG0_PREDV0);
/* CK_PLL = (CK_HXTAL/2) * 42 = 168 MHz */
RCU_CFG0 &= ~(RCU_CFG0_PLLMF | RCU_CFG0_PLLMF_4 | RCU_CFG0_PLLMF_5);
RCU_CFG0 |= RCU_PLL_MUL42;
#elif (defined(GD32E50X_CL) || defined(GD32E508))
/* CK_PLL = (CK_PREDIV0) * 42 = 168 MHz */
RCU_CFG0 &= ~(RCU_CFG0_PLLMF | RCU_CFG0_PLLMF_4 | RCU_CFG0_PLLMF_5);
RCU_CFG0 |= (RCU_PLLSRC_HXTAL_IRC48M | RCU_PLL_MUL42);
/* CK_PREDIV0 = (CK_HXTAL)/5 *8 /10 = 4 MHz */
RCU_CFG1 &= ~(RCU_CFG1_PLLPRESEL | RCU_CFG1_PREDV0SEL | RCU_CFG1_PLL1MF | RCU_CFG1_PREDV1 | RCU_CFG1_PREDV0);
RCU_CFG1 |= (RCU_PLLPRESRC_HXTAL | RCU_PREDV0SRC_CKPLL1 | RCU_PLL1_MUL8 | RCU_PREDV1_DIV5 | RCU_PREDV0_DIV10);
/* enable PLL1 */
RCU_CTL |= RCU_CTL_PLL1EN;
/* wait till PLL1 is ready */
while((RCU_CTL & RCU_CTL_PLL1STB) == 0U){
}
#elif defined(GD32EPRT)
/* CK_PLL = (CK_PREDIV0) * 42 = 168 MHz */
RCU_CFG0 &= ~(RCU_CFG0_PLLMF | RCU_CFG0_PLLMF_4 | RCU_CFG0_PLLMF_5);
RCU_CFG0 |= (RCU_PLLSRC_HXTAL_IRC48M | RCU_PLL_MUL42);
/* CK_PREDIV0 = (CK_HXTAL)/2 *8 /8 = 4 MHz */
RCU_CFG1 &= ~(RCU_CFG1_PLLPRESEL | RCU_CFG1_PREDV0SEL | RCU_CFG1_PLL1MF | RCU_CFG1_PREDV1 | RCU_CFG1_PREDV0);
RCU_CFG1 |= (RCU_PLLPRESRC_HXTAL | RCU_PREDV0SRC_CKPLL1 | RCU_PLL1_MUL8 | RCU_PREDV1_DIV2 | RCU_PREDV0_DIV8);
/* enable PLL1 */
RCU_CTL |= RCU_CTL_PLL1EN;
/* wait till PLL1 is ready */
while((RCU_CTL & RCU_CTL_PLL1STB) == 0U){
}
#endif /* GD32F50X_HD */
/* enable PLL */
RCU_CTL |= RCU_CTL_PLLEN;
/* wait until PLL is stable */
while(0U == (RCU_CTL & RCU_CTL_PLLSTB)){
}
/* enable the high-drive to extend the clock frequency to 180 MHz */
PMU_CTL0 |= PMU_CTL0_HDEN;
while(0U == (PMU_CS0 & PMU_CS0_HDRF)){
}
/* select the high-drive mode */
PMU_CTL0 |= PMU_CTL0_HDS;
while(0U == (PMU_CS0 & PMU_CS0_HDSRF)){
}
reg_temp = RCU_CFG0;
/* select PLL as system clock */
reg_temp &= ~RCU_CFG0_SCS;
reg_temp |= RCU_CKSYSSRC_PLL;
RCU_CFG0 = reg_temp;
/* wait until PLL is selected as system clock */
while(RCU_SCSS_PLL != (RCU_CFG0 & RCU_CFG0_SCSS)){
}
RCU_MODIFY_UP(0x50);
}
#elif defined (__SYSTEM_CLOCK_180M_PLL_HXTAL)
/*!
\brief configure the system clock to 180M by PLL which selects HXTAL as its clock source
\param[in] none
\param[out] none
\retval none
*/
static void system_clock_180m_hxtal(void)
{
uint32_t timeout = 0U;
uint32_t stab_flag = 0U;
__IO uint32_t reg_temp;
/* enable HXTAL */
RCU_CTL |= RCU_CTL_HXTALEN;
HXTALSTB_DELAY
/* wait until HXTAL is stable or the startup time is longer than HXTAL_STARTUP_TIMEOUT */
do{
timeout++;
stab_flag = (RCU_CTL & RCU_CTL_HXTALSTB);
}while((0U == stab_flag) && (HXTAL_STARTUP_TIMEOUT != timeout));
/* if fail */
if(0U == (RCU_CTL & RCU_CTL_HXTALSTB)){
while(1){
}
}
FMC_WS = (FMC_WS & (~FMC_WS_WSCNT)) | WS_WSCNT(4);
RCU_APB1EN |= RCU_APB1EN_PMUEN;
/* HXTAL is stable */
/* AHB = SYSCLK/4 */
RCU_CFG0 |= RCU_AHB_CKSYS_DIV4;
/* APB2 = AHB/1 */
RCU_CFG0 |= RCU_APB2_CKAHB_DIV1;
/* APB1 = AHB/2 */
RCU_CFG0 |= RCU_APB1_CKAHB_DIV2;
#if defined(GD32E50X_HD)
/* select HXTAL/2 as clock source */
RCU_CFG0 &= ~(RCU_CFG0_PLLSEL | RCU_CFG0_PREDV0);
RCU_CFG0 |= (RCU_PLLSRC_HXTAL_IRC48M | RCU_CFG0_PREDV0);
/* CK_PLL = (CK_HXTAL/2) * 45 = 180 MHz */
RCU_CFG0 &= ~(RCU_CFG0_PLLMF | RCU_CFG0_PLLMF_4 | RCU_CFG0_PLLMF_5);
RCU_CFG0 |= RCU_PLL_MUL45;
#elif defined(GD32E508)
/* GD32E508 + 8MHz HXTAL:
CK_PREDIV0 = (CK_HXTAL)/2 *8 /8 = 4 MHz
CK_PLL = CK_PREDIV0 * 45 = 180 MHz */
RCU_CFG0 &= ~(RCU_CFG0_PLLMF | RCU_CFG0_PLLMF_4 | RCU_CFG0_PLLMF_5);
RCU_CFG0 |= (RCU_PLLSRC_HXTAL_IRC48M | RCU_PLL_MUL45);
RCU_CFG1 &= ~(RCU_CFG1_PLLPRESEL | RCU_CFG1_PREDV0SEL | RCU_CFG1_PLL1MF | RCU_CFG1_PREDV1 | RCU_CFG1_PREDV0);
RCU_CFG1 |= (RCU_PLLPRESRC_HXTAL | RCU_PREDV0SRC_CKPLL1 | RCU_PLL1_MUL8 | RCU_PREDV1_DIV2 | RCU_PREDV0_DIV8);
/* enable PLL1 */
RCU_CTL |= RCU_CTL_PLL1EN;
/* wait till PLL1 is ready */
while((RCU_CTL & RCU_CTL_PLL1STB) == 0U){
}
#elif defined(GD32E50X_CL)
/* CK_PLL = (CK_PREDIV0) * 45 = 180 MHz */
RCU_CFG0 &= ~(RCU_CFG0_PLLMF | RCU_CFG0_PLLMF_4 | RCU_CFG0_PLLMF_5);
RCU_CFG0 |= (RCU_PLLSRC_HXTAL_IRC48M | RCU_PLL_MUL45);
/* CK_PREDIV0 = (CK_HXTAL)/5 *8 /10 = 4 MHz */
RCU_CFG1 &= ~(RCU_CFG1_PLLPRESEL | RCU_CFG1_PREDV0SEL | RCU_CFG1_PLL1MF | RCU_CFG1_PREDV1 | RCU_CFG1_PREDV0);
RCU_CFG1 |= (RCU_PLLPRESRC_HXTAL | RCU_PREDV0SRC_CKPLL1 | RCU_PLL1_MUL8 | RCU_PREDV1_DIV5 | RCU_PREDV0_DIV10) ;
/* enable PLL1 */
RCU_CTL |= RCU_CTL_PLL1EN;
/* wait till PLL1 is ready */
while((RCU_CTL & RCU_CTL_PLL1STB) == 0U){
}
#elif defined(GD32EPRT)
/* CK_PLL = (CK_PREDIV0) * 45 = 180 MHz */
RCU_CFG0 &= ~(RCU_CFG0_PLLMF | RCU_CFG0_PLLMF_4 | RCU_CFG0_PLLMF_5);
RCU_CFG0 |= (RCU_PLLSRC_HXTAL_IRC48M | RCU_PLL_MUL45);
/* CK_PREDIV0 = (CK_HXTAL)/2 *8 /8 = 4 MHz */
RCU_CFG1 &= ~(RCU_CFG1_PLLPRESEL | RCU_CFG1_PREDV0SEL | RCU_CFG1_PLL1MF | RCU_CFG1_PREDV1 | RCU_CFG1_PREDV0);
RCU_CFG1 |= (RCU_PLLPRESRC_HXTAL | RCU_PREDV0SRC_CKPLL1 | RCU_PLL1_MUL8 | RCU_PREDV1_DIV2 | RCU_PREDV0_DIV8);
/* enable PLL1 */
RCU_CTL |= RCU_CTL_PLL1EN;
/* wait till PLL1 is ready */
while((RCU_CTL & RCU_CTL_PLL1STB) == 0U){
}
#endif /* GD32F50X_HD */
/* enable PLL */
RCU_CTL |= RCU_CTL_PLLEN;
/* wait until PLL is stable */
while(0U == (RCU_CTL & RCU_CTL_PLLSTB)){
}
/* enable the high-drive to extend the clock frequency to 180 MHz */
PMU_CTL0 |= PMU_CTL0_HDEN;
while(0U == (PMU_CS0 & PMU_CS0_HDRF)){
}
/* select the high-drive mode */
PMU_CTL0 |= PMU_CTL0_HDS;
while(0U == (PMU_CS0 & PMU_CS0_HDSRF)){
}
reg_temp = RCU_CFG0;
/* select PLL as system clock */
reg_temp &= ~RCU_CFG0_SCS;
reg_temp |= RCU_CKSYSSRC_PLL;
RCU_CFG0 = reg_temp;
/* wait until PLL is selected as system clock */
while(RCU_SCSS_PLL != (RCU_CFG0 & RCU_CFG0_SCSS)){
}
RCU_MODIFY_UP(0x50);
}
#endif /* __SYSTEM_CLOCK_IRC8M */
/*!
\brief update the SystemCoreClock with current core clock retrieved from CPU registers
\param[in] none
\param[out] none
\retval none
*/
void SystemCoreClockUpdate (void)
{
uint32_t sws;
uint32_t pllsel, pllpresel, predv0sel, pllmf, ck_src, idx, clk_exp;
#if (defined(GD32E50X_CL) || defined(GD32EPRT) || defined(GD32E508))
uint32_t predv0, predv1, pll1mf;
#endif /* GD32E50X_CL and GD32EPRT*/
/* exponent of AHB, APB1 and APB2 clock divider */
uint8_t ahb_exp[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
sws = GET_BITS(RCU_CFG0, 2, 3);
switch(sws){
/* IRC8M is selected as CK_SYS */
case SEL_IRC8M:
SystemCoreClock = IRC8M_VALUE;
break;
/* HXTAL is selected as CK_SYS */
case SEL_HXTAL:
SystemCoreClock = HXTAL_VALUE;
break;
/* PLL is selected as CK_SYS */
case SEL_PLL:
/* PLL clock source selection, HXTAL, IRC48M or IRC8M/2 */
pllsel = (RCU_CFG0 & RCU_CFG0_PLLSEL);
if(RCU_PLLSRC_HXTAL_IRC48M == pllsel) {
/* PLL clock source is HXTAL or IRC48M */
pllpresel = (RCU_CFG1 & RCU_CFG1_PLLPRESEL);
if(RCU_PLLPRESRC_HXTAL == pllpresel){
/* PLL clock source is HXTAL */
ck_src = HXTAL_VALUE;
}else{
/* PLL clock source is IRC48 */
ck_src = IRC48M_VALUE;
}
#if defined(GD32E50X_HD)
predv0sel = (RCU_CFG0 & RCU_CFG0_PREDV0);
/* PREDV0 input source clock divided by 2 */
if(RCU_CFG0_PREDV0 == predv0sel){
ck_src = ck_src/2U;
}
#elif (defined(GD32E50X_CL) || defined(GD32EPRT) || defined(GD32E508))
predv0sel = (RCU_CFG1 & RCU_CFG1_PREDV0SEL);
/* source clock use PLL1 */
if(RCU_PREDV0SRC_CKPLL1 == predv0sel){
predv1 = ((RCU_CFG1 & RCU_CFG1_PREDV1) >> ((uint32_t)4U)) + 1U;
pll1mf = (uint32_t)((RCU_CFG1 & RCU_CFG1_PLL1MF) >> ((uint32_t)8U)) + 2U;
if(17U == pll1mf){
pll1mf = 20U;
}
ck_src = (ck_src/predv1)*pll1mf;
}
predv0 = (RCU_CFG1 & RCU_CFG1_PREDV0) + 1U;
ck_src /= predv0;
#endif /* GD32E50X_HD */
}else{
/* PLL clock source is IRC8M/2 */
ck_src = IRC8M_VALUE/2U;
}
/* PLL multiplication factor */
pllmf = GET_BITS(RCU_CFG0, 18, 21);
if((RCU_CFG0 & RCU_CFG0_PLLMF_4)){
pllmf |= 0x10U;
}
if((RCU_CFG0 & RCU_CFG0_PLLMF_5)){
pllmf |= 0x20U;
}
if(pllmf < 15U){
pllmf += 2U;
}else if((pllmf >= 15U) && (pllmf <= 64U)){
pllmf += 1U;
}else{
}
SystemCoreClock = ck_src*pllmf;
#if (defined(GD32E50X_CL) || defined(GD32EPRT) || defined(GD32E508))
if(15U == pllmf){
SystemCoreClock = ck_src*6U + ck_src/2U;
}
#endif /* GD32E50X_CL and GD32EPRT and GD32E508 */
break;
/* IRC8M is selected as CK_SYS */
default:
SystemCoreClock = IRC8M_VALUE;
break;
}
/* calculate AHB clock frequency */
idx = GET_BITS(RCU_CFG0, 4, 7);
clk_exp = ahb_exp[idx];
SystemCoreClock >>= clk_exp;
}
#ifdef __FIRMWARE_VERSION_DEFINE
/*!
\brief get firmware version
\param[in] none
\param[out] none
\retval firmware version
*/
uint32_t gd32e50x_firmware_version_get(void)
{
return __GD32E50X_STDPERIPH_VERSION;
}
#endif /* __FIRMWARE_VERSION_DEFINE */
Reference in New Issue View Git Blame Copy Permalink