Files
Motor_v2/Robot_V2/sys/systick.h
T
cbb 7354a71c51 feat(can): 增加CAN睡眠与唤醒功能并优化通信检查逻辑
- 在CAN通信类中添加了CAN_Sleep()和CAN_Wakeup()方法,支持设备进入低功耗模式
- 优化CAN通信检查逻辑,通过解析接收数据的首字节和末字节实现多种控制命令
- 支持远程复位电机、保存角度、清零角度、进入睡眠等操作
- 解决CAN发送邮箱满时可能导致的通信阻塞问题,增加重初始化机制
- 调整mailbox不可用计数逻辑,防止持续打印错误信息

refactor(flash): 移除软件CRC计算模块,改用硬件CRC外设
- 删除自定义CRC.cpp和CRC.h文件及其相关类实现
- 使用GD32硬件CRC模块替代软件算法,提高效率和可靠性
- 更新FlashEEPROM类中的CRC校验方式,调用crc_block_data_calculate进行计算
- 修正Flash地址遍历范围以适配新CRC逻辑及页面管理策略
- 修改save_angle接口签名,不再手动传入角度值,改为内部读取FOC实时角度

feat(timer): 新增RTC闹钟中断处理函数声明

- 在Timer.h中声明rtc_set_wakeup_interval和RTC_ALARM_IRQHandler
- 为后续实现基于RTC的定时唤醒功能做准备

chore(config): 同步csolution工具版本更新并调整组件配置

- 更新RTE_Components.h生成工具版本至2.12.0
- 启用BKP、CRC、RTC等标准外设组件宏定义
- 从项目配置文件中移除旧CRC源文件引用
- 添加SystemCoreClockUpdate调用确保系统时钟同步

refactor(main): 主循环任务调度重构并增强初始化流程

- 将主循环中的任务处理提取为独立do_task函数,提升代码可读性
- 提前执行电机初始化,并根据看门狗复位标志决定是否立即进入深度睡眠
- 调整EEPROM初始化顺序,保证依赖关系正确
- 添加sys/initial.h头文件包含以支持新增系统初始化逻辑
2025-12-20 19:53:52 +08:00

66 lines
2.2 KiB
C

/*!
\file systick.h
\brief the header file of systick
\version 2025-06-20, V1.5.1, firmware for GD32C10x
*/
/*
Copyright (c) 2024, GigaDevice Semiconductor Inc.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice,
this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice,
this list of conditions and the following disclaimer in the documentation
and/or other materials provided with the distribution.
3. Neither the name of the copyright holder nor the names of its
contributors may be used to endorse or promote products derived from this
software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef SYSTICK_H
#define SYSTICK_H
#ifdef __cplusplus
extern "C" {
#endif
#include <stdint.h>
/* configure systick */
void systick_config(void);
/* delay a time in milliseconds */
void delay_1ms(uint32_t count);
/* delay a time in seconds */
void delay_1s(uint32_t count);
/* delay decrement */
void delay_decrement(void);
/* 空闲任务计数 */
void idle_task_count(void);
/* 获取CPU使用率 */
uint8_t get_cpu_usage(void);
/* 系统软复位 */
void system_soft_reset(void);
/* 准备进入低功耗模式 */
void prepare_deep_sleep(bool save_data);
/* 中断唤醒 */
void EXTI5_9_IRQHandler(void);
#ifdef __cplusplus
}
#endif
#endif /* SYSTICK_H */