exp+fix: try3 反向档位(刹车+93%/到达-6.6pp)与 K16 构成试候选数的单调轴；reverse 指标补动步口径+可手算负对照

ml/sim/closed_loop.py

@@ -203,6 +203,7 @@ def rollout(model, kin, tasks, device, K=8, safety=False, seed=0, max_sec=None,
     # 2026-10-20（轮次33）：速度/加速度按「实际执行位移」算，不看指令——第30轮证明反馈是在限幅之后叠加的
     vratio = torch.zeros(B, device=device); aratio = torch.zeros(B, device=device); prev_exec = torch.zeros(B, 6, device=device)
     rev = torch.zeros(B, device=device); nact = torch.zeros(B, device=device); prev_sgn = torch.zeros(B, 6, device=device)
+    nmov = torch.zeros(B, device=device)
     traj = [q.clone()] if return_traj else None
     plans = {k: [] for k in ('it', 'r', 'qe', 'commit', 'points', 'midpoints', 'gaps', 'certified')} if return_traj else None
     n_start = int(round(0.5 / DT)); moved_start = None          # R2 起步失败：0.5 s 内关节总行程 < 1°
@@ -479,10 +480,11 @@ def rollout(model, kin, tasks, device, K=8, safety=False, seed=0, max_sec=None,
         vratio = torch.maximum(vratio, (exec_d / step).max(-1).values * act_)       # 实际速度 / VMAX
         aratio = torch.maximum(aratio, ((exec_d - prev_exec) / step).max(-1).values * act_)   # 每控制步的速度变化 / VMAX
         prev_exec = exec_d
-        sgn = torch.sign(q - qp)      # 换向率：轮次 39 的分解证明"行程超出 2.4 倍"主要是同一轴来回抖，不是绕远
+        sgn = torch.sign(q - qp)      # 换向率：轮次 39 的分解证明"行程超出 2.4 倍"里同轴来回占大头
         rev += ((sgn != 0) & (prev_sgn != 0) & (sgn == -prev_sgn)).float().sum(-1) * act_
         prev_sgn = torch.where(sgn != 0, sgn, prev_sgn)      # 零步不重置方向（站住再走同向不算换向）
         nact += act_
+        nmov += act_ * (exec_d.sum(-1) > 1e-6).float()       # 只在"动了"的步上算换向：站住会稀释分母（刹停越多的臂会显得越不抖）
         e, oe = goal_err(kin, q, T, R)
         if it + 1 == k2s: e2 = e.clone()
         newly = (~done) & (e < 1) & (oe < 0.5)
@@ -513,7 +515,9 @@ def rollout(model, kin, tasks, device, K=8, safety=False, seed=0, max_sec=None,
            'side': side.cpu(), 'start_fail': start_fail.cpu(), 'brakes': brakes.cpu(), 'backoff': bo.cpu(), 'first_hit': first_hit.cpu(), 'dls_it': dls_it.cpu(),
            'goal_ratio_2s': ratio2.cpu(), 'speed_ratio': vratio.cpu(), 'accel_ratio': aratio.cpu(),
            # 口径与离线分解一致：换向的 (步,轴) 对数 / 活动的 (步,轴) 对数 ∈ [0,1]（除以 6 个轴）
-           'reverse_rate': (rev / (6.0 * nact.clamp_min(1.0))).cpu()}
+           'reverse_rate': (rev / (6.0 * nact.clamp_min(1.0))).cpu(),
+           'reverse_rate_moving': (rev / (6.0 * nmov.clamp_min(1.0))).cpu(),
+           'moving_share': (nmov / nact.clamp_min(1.0)).cpu()}
     if return_traj:
         per['traj'] = torch.stack(traj, 1).cpu()
         per['plans'] = {k: torch.tensor(v) if k in ('it', 'r') else torch.stack(v, 1).cpu() for k, v in plans.items()}