cbb
4b8b47bc9b
- 新增完整的CMSIS解决方案配置，包含AC6/GCC/IAR/CLANG编译器支持 - 添加项目配置文件，定义了设备层、系统层、应用层的模块结构 - 配置ARM::CMSIS和GigaDevice::GD32E50x_DFP软件包依赖 - 创建多层代码架构：应用入口(main)、系统层(sys)、设备层(device) - 实现任务管理系统，包含任务调度器和任务执行器分离设计 - 集成ADC、CANFD、定时器、串口、温度采样等核心功能模块 - 添加详细的README文档说明项目结构和代码组织方式 - 配置AC6链接脚本和运行时环境文件 - 设置Git忽略规则以排除编译产物和临时文件
250 lines
8.0 KiB
Plaintext
250 lines
8.0 KiB
Plaintext
/*!
|
|
\file gd32e50x_exti.c
|
|
\brief EXTI driver
|
|
|
|
\version 2026-02-09, V1.7.0, firmware for GD32E50x
|
|
*/
|
|
|
|
/*
|
|
Copyright (c) 2025, GigaDevice Semiconductor Inc.
|
|
|
|
Redistribution and use in source and binary forms, with or without modification,
|
|
are permitted provided that the following conditions are met:
|
|
|
|
1. Redistributions of source code must retain the above copyright notice, this
|
|
list of conditions and the following disclaimer.
|
|
2. Redistributions in binary form must reproduce the above copyright notice,
|
|
this list of conditions and the following disclaimer in the documentation
|
|
and/or other materials provided with the distribution.
|
|
3. Neither the name of the copyright holder nor the names of its contributors
|
|
may be used to endorse or promote products derived from this software without
|
|
specific prior written permission.
|
|
|
|
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
|
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
|
|
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
|
|
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
|
|
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
|
|
OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#include "gd32e50x_exti.h"
|
|
|
|
#define EXTI_REG_RESET_VALUE ((uint32_t)0x00000000U)
|
|
|
|
/*!
|
|
\brief deinitialize the EXTI
|
|
\param[in] none
|
|
\param[out] none
|
|
\retval none
|
|
*/
|
|
void exti_deinit(void)
|
|
{
|
|
/* reset the value of all the EXTI registers */
|
|
EXTI_INTEN = EXTI_REG_RESET_VALUE;
|
|
EXTI_EVEN = EXTI_REG_RESET_VALUE;
|
|
EXTI_RTEN = EXTI_REG_RESET_VALUE;
|
|
EXTI_FTEN = EXTI_REG_RESET_VALUE;
|
|
EXTI_SWIEV = EXTI_REG_RESET_VALUE;
|
|
}
|
|
|
|
/*!
|
|
\brief initialize the EXTI line x
|
|
\param[in] linex: EXTI line number, refer to exti_line_enum
|
|
only one parameter can be selected which is shown as below:
|
|
\arg EXTI_x (x=0..21): EXTI line x
|
|
\param[in] mode: interrupt or event mode, refer to exti_mode_enum
|
|
only one parameter can be selected which is shown as below:
|
|
\arg EXTI_INTERRUPT: interrupt mode
|
|
\arg EXTI_EVENT: event mode
|
|
\param[in] trig_type: interrupt trigger type, refer to exti_trig_type_enum
|
|
only one parameter can be selected which is shown as below:
|
|
\arg EXTI_TRIG_RISING: rising edge trigger
|
|
\arg EXTI_TRIG_FALLING: falling trigger
|
|
\arg EXTI_TRIG_BOTH: rising and falling trigger
|
|
\arg EXTI_TRIG_NONE: without rising edge or falling edge trigger
|
|
\param[out] none
|
|
\retval none
|
|
*/
|
|
void exti_init(exti_line_enum linex, exti_mode_enum mode, exti_trig_type_enum trig_type)
|
|
{
|
|
/* reset the EXTI line x */
|
|
EXTI_INTEN &= ~(uint32_t)linex;
|
|
EXTI_EVEN &= ~(uint32_t)linex;
|
|
EXTI_RTEN &= ~(uint32_t)linex;
|
|
EXTI_FTEN &= ~(uint32_t)linex;
|
|
|
|
/* set the EXTI mode and enable the interrupts or events from EXTI line x */
|
|
switch(mode){
|
|
case EXTI_INTERRUPT:
|
|
EXTI_INTEN |= (uint32_t)linex;
|
|
break;
|
|
case EXTI_EVENT:
|
|
EXTI_EVEN |= (uint32_t)linex;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
/* set the EXTI trigger type */
|
|
switch(trig_type){
|
|
case EXTI_TRIG_RISING:
|
|
EXTI_RTEN |= (uint32_t)linex;
|
|
EXTI_FTEN &= ~(uint32_t)linex;
|
|
break;
|
|
case EXTI_TRIG_FALLING:
|
|
EXTI_RTEN &= ~(uint32_t)linex;
|
|
EXTI_FTEN |= (uint32_t)linex;
|
|
break;
|
|
case EXTI_TRIG_BOTH:
|
|
EXTI_RTEN |= (uint32_t)linex;
|
|
EXTI_FTEN |= (uint32_t)linex;
|
|
break;
|
|
case EXTI_TRIG_NONE:
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*!
|
|
\brief enable the interrupts from EXTI line x
|
|
\param[in] linex: EXTI line number, refer to exti_line_enum
|
|
only one parameter can be selected which is shown as below:
|
|
\arg EXTI_x (x=0..21): EXTI line x
|
|
\param[out] none
|
|
\retval none
|
|
*/
|
|
void exti_interrupt_enable(exti_line_enum linex)
|
|
{
|
|
EXTI_INTEN |= (uint32_t)linex;
|
|
}
|
|
|
|
/*!
|
|
\brief disable the interrupt from EXTI line x
|
|
\param[in] linex: EXTI line number, refer to exti_line_enum
|
|
only one parameter can be selected which is shown as below:
|
|
\arg EXTI_x (x=0..21): EXTI line x
|
|
\param[out] none
|
|
\retval none
|
|
*/
|
|
void exti_interrupt_disable(exti_line_enum linex)
|
|
{
|
|
EXTI_INTEN &= ~(uint32_t)linex;
|
|
}
|
|
|
|
/*!
|
|
\brief enable the events from EXTI line x
|
|
\param[in] linex: EXTI line number, refer to exti_line_enum
|
|
only one parameter can be selected which is shown as below:
|
|
\arg EXTI_x (x=0..21): EXTI line x
|
|
\param[out] none
|
|
\retval none
|
|
*/
|
|
void exti_event_enable(exti_line_enum linex)
|
|
{
|
|
EXTI_EVEN |= (uint32_t)linex;
|
|
}
|
|
|
|
/*!
|
|
\brief disable the events from EXTI line x
|
|
\param[in] linex: EXTI line number, refer to exti_line_enum
|
|
only one parameter can be selected which is shown as below:
|
|
\arg EXTI_x (x=0..21): EXTI line x
|
|
\param[out] none
|
|
\retval none
|
|
*/
|
|
void exti_event_disable(exti_line_enum linex)
|
|
{
|
|
EXTI_EVEN &= ~(uint32_t)linex;
|
|
}
|
|
|
|
/*!
|
|
\brief enable the software interrupt event from EXTI line x
|
|
\param[in] linex: EXTI line number, refer to exti_line_enum
|
|
only one parameter can be selected which is shown as below:
|
|
\arg EXTI_x (x=0..21): EXTI line x
|
|
\param[out] none
|
|
\retval none
|
|
*/
|
|
void exti_software_interrupt_enable(exti_line_enum linex)
|
|
{
|
|
EXTI_SWIEV |= (uint32_t)linex;
|
|
}
|
|
|
|
/*!
|
|
\brief disable the software interrupt event from EXTI line x
|
|
\param[in] linex: EXTI line number, refer to exti_line_enum
|
|
only one parameter can be selected which is shown as below:
|
|
\arg EXTI_x (x=0..21): EXTI line x
|
|
\param[out] none
|
|
\retval none
|
|
*/
|
|
void exti_software_interrupt_disable(exti_line_enum linex)
|
|
{
|
|
EXTI_SWIEV &= ~(uint32_t)linex;
|
|
}
|
|
|
|
/*!
|
|
\brief get EXTI line x interrupt pending flag
|
|
\param[in] linex: EXTI line number, refer to exti_line_enum
|
|
only one parameter can be selected which is shown as below:
|
|
\arg EXTI_x (x=0..21): EXTI line x
|
|
\param[out] none
|
|
\retval FlagStatus: status of flag (RESET or SET)
|
|
*/
|
|
FlagStatus exti_flag_get(exti_line_enum linex)
|
|
{
|
|
if(RESET != (EXTI_PD & (uint32_t)linex)){
|
|
return SET;
|
|
}else{
|
|
return RESET;
|
|
}
|
|
}
|
|
|
|
/*!
|
|
\brief clear EXTI line x interrupt pending flag
|
|
\param[in] linex: EXTI line number, refer to exti_line_enum
|
|
only one parameter can be selected which is shown as below:
|
|
\arg EXTI_x (x=0..21): EXTI line x
|
|
\param[out] none
|
|
\retval none
|
|
*/
|
|
void exti_flag_clear(exti_line_enum linex)
|
|
{
|
|
EXTI_PD = (uint32_t)linex;
|
|
}
|
|
|
|
/*!
|
|
\brief get EXTI line x interrupt pending flag
|
|
\param[in] linex: EXTI line number, refer to exti_line_enum
|
|
only one parameter can be selected which is shown as below:
|
|
\arg EXTI_x (x=0..21): EXTI line x
|
|
\param[out] none
|
|
\retval FlagStatus: status of flag (RESET or SET)
|
|
*/
|
|
FlagStatus exti_interrupt_flag_get(exti_line_enum linex)
|
|
{
|
|
if(RESET != (EXTI_PD & (uint32_t)linex)) {
|
|
return SET;
|
|
} else {
|
|
return RESET;
|
|
}
|
|
}
|
|
|
|
/*!
|
|
\brief clear EXTI line x interrupt pending flag
|
|
\param[in] linex: EXTI line number, refer to exti_line_enum
|
|
only one parameter can be selected which is shown as below:
|
|
\arg EXTI_x (x=0..21): EXTI line x
|
|
\param[out] none
|
|
\retval none
|
|
*/
|
|
void exti_interrupt_flag_clear(exti_line_enum linex)
|
|
{
|
|
EXTI_PD = (uint32_t)linex;
|
|
}
|