DCU_APP/GD32E508_DCU_APP/device/CANFD.cpp.bak_canrcu

/**
 * @file CANFD.cpp
 * @brief CANFD 通信外设初始化、收发与诊断实现。
 */

#include "main.h"
#include "device/canfd.h"
#include "sys/config.h"

namespace {

/** @brief 内部接收帧缓存结构。 */
struct CanfdRxFrame {
    uint32_t id = 0U;
    uint8_t data[64] = {0};
    uint8_t length = 0U;
    uint8_t valid = 0U;
};

/** @brief 内部发送帧缓存结构。 */
struct CanfdTxBuffer {
    can_trasnmit_message_struct tx_message{};
    uint8_t payload[64] = {0};
    uint8_t valid = 0U;
};

canfd_diag_t g_can_diag{};
CanfdRxFrame g_rx_frame{};
CanfdTxBuffer g_tx_buffer{};

/**
 * @brief 初始化 CAN 外设所需 GPIO 引脚。
 */
inline void can_gpio_init()
{
    rcu_periph_clock_enable(CONFIG_CAN_INSTANCE);
    rcu_periph_clock_enable(RCU_GPIOB);
    rcu_periph_clock_enable(RCU_AF);

    gpio_init(GPIOB, GPIO_MODE_IPU, GPIO_OSPEED_50MHZ, GPIO_PIN_8);
    gpio_init(GPIOB, GPIO_MODE_AF_PP, GPIO_OSPEED_50MHZ, GPIO_PIN_9);
    gpio_pin_remap_config(GPIO_CAN0_PARTIAL_REMAP, ENABLE);
}

/**
 * @brief 配置 CAN 接收过滤器为接受所有报文。
 */
inline void can_filter_accept_all()
{
    can_filter_parameter_struct can_filter{};
    can_filter.filter_number = 0U;
    can_filter.filter_mode = CAN_FILTERMODE_MASK;
    can_filter.filter_bits = CAN_FILTERBITS_32BIT;
    can_filter.filter_list_high = 0x0000U;
    can_filter.filter_list_low = 0x0000U;
    can_filter.filter_mask_high = 0x0000U;
    can_filter.filter_mask_low = 0x0000U;
    can_filter.filter_fifo_number = CAN_FIFO0;
    can_filter.filter_enable = ENABLE;
    can_filter_init(CONFIG_CAN_INSTANCE, &can_filter);
}

/**
 * @brief 配置 CAN 标称位定时参数。
 */
inline void can_nominal_init()
{
    can_parameter_struct can_parameter{};

    can_struct_para_init(CAN_INIT_STRUCT, &can_parameter);
    can_parameter.time_triggered = DISABLE;
    can_parameter.auto_bus_off_recovery = ENABLE;
    can_parameter.auto_wake_up = DISABLE;
    can_parameter.auto_retrans = ENABLE;
    can_parameter.rec_fifo_overwrite = DISABLE;
    can_parameter.trans_fifo_order = DISABLE;
    can_parameter.working_mode = CAN_NORMAL_MODE;
    can_parameter.resync_jump_width = CAN_BT_SJW_1TQ;
    can_parameter.time_segment_1 = CAN_BT_BS1_8TQ;
    can_parameter.time_segment_2 = CAN_BT_BS2_3TQ;
    can_parameter.prescaler = CONFIG_CAN_NOMINAL_BAUD_PRESCALER;
    can_init(CONFIG_CAN_INSTANCE, &can_parameter);
}

/**
 * @brief 配置 CANFD 可变速率模式参数。
 * @note 在 GD32E508 上启用 ISO 模式；非 GD32E508 平台仅启用 FD 功能。
 */
inline void can_fd_mode_init()
{
#ifdef GD32E508
    can_fdframe_struct can_fd_parameter{};

    can_struct_para_init(CAN_FD_FRAME_STRUCT, &can_fd_parameter);
    can_fd_parameter.fd_frame = ENABLE;
    can_fd_parameter.excp_event_detect = ENABLE;
    can_fd_parameter.delay_compensation = DISABLE;
    can_fd_parameter.iso_bosch = CAN_FDMOD_ISO;
    can_fd_parameter.esi_mode = CAN_ESIMOD_HARDWARE;
    can_fd_parameter.data_prescaler = 1U;
    can_fd_parameter.data_resync_jump_width = 0U;
    can_fd_parameter.data_time_segment_1 = 2U;
    can_fd_parameter.data_time_segment_2 = 1U;
    can_fd_init(CONFIG_CAN_INSTANCE, &can_fd_parameter);
#else
    can_fd_function_enable(CONFIG_CAN_INSTANCE);
#endif
}

/**
 * @brief 根据状态载荷构造 CANFD 状态发送帧并置有效标志。
 * @param[in] status 指向状态载荷的指针；不为空时执行构造和置位。
 */
inline void canfd_build_status_frame(const canfd_status_payload_t *status)
{
    const int16_t temp_x100 = static_cast<int16_t>(status->temperature * 100.0f);
    const uint16_t vdda_x1000 = static_cast<uint16_t>(status->vdda * 1000.0f);

    can_struct_para_init(CAN_TX_MESSAGE_STRUCT, &g_tx_buffer.tx_message);
    g_tx_buffer.tx_message.tx_sfid = CONFIG_CAN_STATUS_ID;
    g_tx_buffer.tx_message.tx_efid = 0U;
    g_tx_buffer.tx_message.tx_ff = CAN_FF_STANDARD;
    g_tx_buffer.tx_message.tx_ft = CAN_FT_DATA;
    g_tx_buffer.tx_message.tx_dlen = CANFD_STATUS_DLEN;
#ifdef GD32E508
    g_tx_buffer.tx_message.fd_flag = ENABLE;
    g_tx_buffer.tx_message.fd_brs = CAN_BRS_DISABLE;
    g_tx_buffer.tx_message.fd_esi = CAN_ESI_DOMINANT;
#endif

    auto &p = g_tx_buffer.payload;
    p[0] = static_cast<uint8_t>(status->temp_raw & 0xFFU);
    p[1] = static_cast<uint8_t>((status->temp_raw >> 8) & 0xFFU);
    p[2] = static_cast<uint8_t>(status->vref_raw & 0xFFU);
    p[3] = static_cast<uint8_t>((status->vref_raw >> 8) & 0xFFU);
    p[4] = static_cast<uint8_t>(temp_x100 & 0xFF);
    p[5] = static_cast<uint8_t>((temp_x100 >> 8) & 0xFF);
    p[6] = static_cast<uint8_t>(vdda_x1000 & 0xFFU);
    p[7] = static_cast<uint8_t>((vdda_x1000 >> 8) & 0xFFU);
    p[8] = CONFIG_CAN_STATUS_TAG0;
    p[9] = CONFIG_CAN_STATUS_TAG1;
    p[10] = CONFIG_CAN_STATUS_TAG2;
    p[11] = CONFIG_CAN_STATUS_TAG3;

    for(uint8_t i = 0; i < CANFD_STATUS_DLEN; ++i) {
        g_tx_buffer.tx_message.tx_data[i] = p[i];
    }
    g_tx_buffer.valid = 1U;
}
} // namespace

/**
 * @brief 初始化 CANFD 外设、GPIO、波特率参数与接收过滤器。
 */
void canfd_init(void)
{
    can_gpio_init();
    can_deinit(CONFIG_CAN_INSTANCE);
    can_nominal_init();
    can_fd_mode_init();
    can_filter_accept_all();
    g_rx_frame.valid = 0U;
    g_tx_buffer.valid = 0U;
}

/**
 * @brief 轮询 CANFD 接收 FIFO，并缓存最近收到的一帧数据。
 * @note 若当前没有待接收报文，直接返回。
 */
void canfd_poll(void)
{
    can_receive_message_struct rx_message{};

    if(can_receive_message_length_get(CONFIG_CAN_INSTANCE, CAN_FIFO0) == 0U) {
        return;
    }

    can_struct_para_init(CAN_RX_MESSAGE_STRUCT, &rx_message);
    can_message_receive(CONFIG_CAN_INSTANCE, CAN_FIFO0, &rx_message);
    g_can_diag.rx_count++;
    g_can_diag.last_payload_length = rx_message.rx_dlen;
    g_can_diag.last_rx_fd_flag = rx_message.fd_flag;
    g_can_diag.last_rx_brs = rx_message.fd_brs;
    g_can_diag.last_rx_esi = rx_message.fd_esi;
    g_can_diag.last_rx_id = (rx_message.rx_ff == CAN_FF_STANDARD) ? rx_message.rx_sfid : rx_message.rx_efid;

    g_rx_frame.id = g_can_diag.last_rx_id;
    g_rx_frame.length = rx_message.rx_dlen;
    for(uint8_t i = 0; i < rx_message.rx_dlen; ++i) {
        g_rx_frame.data[i] = rx_message.rx_data[i];
    }
    g_rx_frame.valid = 1U;
}

/**
 * @brief 根据状态载荷准备一帧待发送的 CANFD 状态报文。
 * @param[in] status 指向状态载荷的指针；为空时将清除待发送标志。
 */
void canfd_prepare_status(const canfd_status_payload_t *status)
{
    if(status == nullptr) {
        g_tx_buffer.valid = 0U;
        return;
    }

    canfd_build_status_frame(status);
}

/**
 * @brief 发送已准备好的 CANFD 状态报文。
 * @note 若当前没有有效待发送报文，直接返回。
 */
void canfd_send_prepared(void)
{
    if(g_tx_buffer.valid == 0U) {
        return;
    }

    const uint8_t mailbox = can_message_transmit(CONFIG_CAN_INSTANCE, &g_tx_buffer.tx_message);
    if(mailbox != CAN_NOMAILBOX) {
        g_can_diag.tx_count++;
        g_can_diag.last_payload_length = g_tx_buffer.tx_message.tx_dlen;
        g_can_diag.last_tx_id = g_tx_buffer.tx_message.tx_sfid;
    } else {
        g_can_diag.error_count++;
    }
}

/**
 * @brief 查询是否存在尚未消费的接收报文。
 * @retval 非 0 存在待消费报文，0 无报文。
 */
uint8_t canfd_has_rx_frame(void)
{
    return g_rx_frame.valid;
}

/**
 * @brief 读取并消费最近一次缓存的接收报文。
 * @param[out] id 输出报文标识符的指针；允许为空。
 * @param[out] data 输出报文数据缓存区指针；允许为空。
 * @param[out] length 输出报文数据长度的指针；允许为空。
 * @retval 1 成功消费一帧报文，0 当前无有效缓存报文。
 */
uint8_t canfd_consume_rx_frame(uint32_t *id, uint8_t *data, uint8_t *length)
{
    if(g_rx_frame.valid == 0U) {
        return 0U;
    }

    if(id != nullptr) {
        *id = g_rx_frame.id;
    }
    if(length != nullptr) {
        *length = g_rx_frame.length;
    }
    if(data != nullptr) {
        for(uint8_t i = 0; i < g_rx_frame.length; ++i) {
            data[i] = g_rx_frame.data[i];
        }
    }

    g_rx_frame.valid = 0U;
    return 1U;
}

/**
 * @brief 获取 CANFD 诊断统计信息只读指针。
 * @retval 指向内部诊断统计结构体的只读指针。
 */
const canfd_diag_t *canfd_get_diag(void)
{
    return &g_can_diag;
}