feat: 更新CMSIS和GD32C10x_DFP包版本并优化代码

- 升级ARM::CMSIS从4.5.0到6.1.0版本
- 添加ARM::CMSIS-DSP@1.16.2依赖包
- 升级GigaDevice::GD32C10x_DFP从1.0.1到1.5.0版本
- 移除FOC.cpp中未使用的systick.h头文件
- 移除pid.cpp中未使用的<algorithm>头文件
- 更新GD32C10x固件库至V1.7.0版本(2026-01-30)
- 修复ADC驱动中的无符号整数运算问题
- 优化BKP、CAN、CTC等外设驱动中的FlagStatus返回逻辑
- 改进CAN驱动的消息发送和传输停止函数实现
- 修复CRC、DMA、FMC等驱动中的数据类型和变量声明问题
- 清理和修正各驱动文件中的文档注释

Robot_V2/RTE/Device/GD32C103CB/gd32c10x_adc.c

@@ -2,11 +2,11 @@
     \file    gd32c10x_adc.c
     \brief   ADC driver
     
-    \version 2025-08-07, V1.6.0, firmware for GD32C10x
+    \version 2026-01-30, V1.7.0, firmware for GD32C10x
 */
 
 /*
-    Copyright (c) 2025, GigaDevice Semiconductor Inc.
+    Copyright (c) 2026, GigaDevice Semiconductor Inc.
 
     Redistribution and use in source and binary forms, with or without modification, 
 are permitted provided that the following conditions are met:
@@ -508,8 +508,8 @@ void adc_inserted_channel_config(uint32_t adc_periph , uint8_t rank , uint8_t ad
     inserted_length = (uint8_t)GET_BITS(ADC_ISQ(adc_periph) , 20U , 21U);
     /* the channel number is written to these bits to select a channel as the nth conversion in the inserted channel group */
     isq = ADC_ISQ(adc_periph);
-    isq &= ~((uint32_t)(ADC_ISQ_ISQN << (5U * ((3 + rank) - inserted_length))));
-    isq |= ((uint32_t)adc_channel << (5U * ((3 + rank) - inserted_length)));
+    isq &= ~((uint32_t)(ADC_ISQ_ISQN << (5U * ((3U + rank) - inserted_length))));
+    isq |= ((uint32_t)adc_channel << (5U * ((3U + rank) - inserted_length)));
     ADC_ISQ(adc_periph) = isq;
 
     /* ADC sampling time config */  
@@ -669,7 +669,6 @@ void adc_software_trigger_enable(uint32_t adc_periph , uint8_t adc_channel_group
 /*!
     \brief      read ADC regular group data register 
     \param[in]  adc_periph: ADCx,x=0,1
-    \param[in]  none
     \param[out] none
     \retval     the conversion value
 */
@@ -848,7 +847,6 @@ void adc_flag_clear(uint32_t adc_periph , uint32_t adc_flag)
 /*!
     \brief      get the bit state of ADCx software start conversion
     \param[in]  adc_periph: ADCx, x=0,1, only one among these parameters can be selected
-    \param[in]  none
     \param[out] none
     \retval     FlagStatus: SET or RESET
 */
@@ -864,7 +862,6 @@ FlagStatus adc_regular_software_startconv_flag_get(uint32_t adc_periph)
 /*!
     \brief      get the bit state of ADCx software inserted channel start conversion
     \param[in]  adc_periph: ADCx, x=0,1 only one among these parameters can be selected
-    \param[in]  none
     \param[out] none
     \retval     FlagStatus: SET or RESET
 */