Motor_v2/Robot_V2/Algorithm/FOC.h

// 函数声明
#ifndef _FOC_H
#define _FOC_H
#include "config.h"
#include "pid.h"
#include <cstdint>

class FOC_Controller {

  public:
	FOC_Controller();

	// 初始化函数
	u8 init();

	u8 control_mode = 0;
	float limit_voltage = 0.0f;

	float target_angle = 0.0f;
	float target_velocity = 0.0f;
	float target_current = 0.0f;

	float rt_angle = 0.0f;
	float rt_velocity = 0.0f;
	float rt_current = 0.0f;

	bool over_current = false;
	bool voltage_error = false;
	bool is_shut_down = false;
	float voltage_power_supply = 24.0f; // 电源电压
	float v_safe = voltage_power_supply * 1.05f;
	float duty_a = 0, duty_b = 0, duty_c = 0;
	float Ua = 0, Ub = 0, Uc = 0;

	float current_loop_p=DEFAULT_current_loop_p;

	float vel_angloop_p=DEFAULT_vel_angloop_p;
	float vel_loop_p=DEFAULT_vel_loop_p;

	float ang_angloop_p=DEFAULT_ang_angloop_p;	
	float angle_loop_p=DEFAULT_angle_loop_p;
	
	float vel_MIT_p=DEFAULT_vel_MIT_p;

	float velocity_open_loop(void);
	float angle_control(void);
	float angle_control_with_velocity_limit(void);
	float MIT_Mode(void);
	float velocity_control(void);
	float current_control(void);

	void update_power(float voltage);
	void DFOC_alignSensor(int _PP);
	void shut_down(void);
	void resume(void);
	void drv_stop(void);
	float drv_hold(void);

	// 此处默认值不作数
	PIDController vel_loop = PIDController{vel_loop_p * 100, 0.0f, 0, 10000,
										   voltage_power_supply}; // 12V
	PIDController angle_loop = PIDController{angle_loop_p * 100, 0, 0, 10000000,
											 voltage_power_supply}; // 12V
	PIDController current_loop = PIDController{current_loop_p * 100, 0, 0, 1500,
											   voltage_power_supply}; // 12V
	PIDController vel_inVelAngloop =	
		PIDController{vel_angloop_p * 100, 0, 0, 1e6, v_safe};
	PIDController ang_inVelAngloop =
		PIDController{ang_angloop_p * 100, 0, 0, 1e4, 100};

		
	PIDController ang_inMITloop =
		PIDController{ang_angloop_p * 100, 0, 0, 1e4, 100};
	PIDController vel_inMITloop =
		PIDController{vel_MIT_p * 100, 0, 0, 1e9, 6000};

	void update_pid_limits() {
		vel_loop.limit = voltage_power_supply;
		angle_loop.limit = voltage_power_supply;
		current_loop.limit = voltage_power_supply;
		vel_inVelAngloop.limit = voltage_power_supply;
	}

  protected:
	float shaft_angle = 0;
	float Ualpha, Ubeta = 0;
	float zero_electric_angle = 0;
	float v_half = voltage_power_supply * 0.5f; // 电源电压的一半
	float startup_ramp_val = 0.0f;      // 软启动系数
	float startup_ramp_step = 0.01f;    // 启动斜坡步长，可调节以控制启动速度
	void setPhaseVoltage(float Uq, float Ud);
	void setSVPWM_PhaseVoltage(float Uq, float Ud);
	float cal_Iq_Id(float current_a, float current_b, float current_c);
};

// 定义函数指针类型
typedef float (FOC_Controller::*FOCFunctionPtr)(void);

inline float _normalizeAngle(float angle);
inline float _electricalAngle();

#endif